2022 John Deere 310l Lug Nut Torque & Bolt Specs
The 2022 John Deere 310l lug nut torque is 266 ft-lbs (360 Nm), tightened with a 30mm socket on M20x2.5 studs. Torque in a star pattern in two passes (snug, then final), and re-check after the first 50–100 miles of driving. Use a calibrated torque wrench — not an impact gun — for the final pass.
Lug nut torque: 266 ft-lbs (360 Nm) · Socket size: 30mm · Thread: M20x2.5.
This page is the OEM-referenced fastener summary for the 2022 John Deere 310l. Use it before any maintenance or repair job where torque values matter — brake work, wheel changes, suspension service, engine teardowns, or oil changes. Specs are pulled from manufacturer service literature, cross-checked against community data, and updated as new chassis variants become available.
For the 2022 John Deere 310l, fasteners follow metric standards typical of late-model John Deere engineering. Always confirm spec against the factory service manual before tightening safety-critical fasteners (suspension, brake, steering, head bolts).
Common fastener categories on the 2022 John Deere 310l
- Wheel / lug nut torque and thread spec (covered above)
- Brake caliper bracket bolts (typically 80-130 ft-lbs) and slide/guide pins (18-35 ft-lbs)
- Engine oil drain plug torque — rarely above 30 ft-lbs; always use a new crush washer
- Transmission pan, valve cover, and intake manifold bolts (low torque, often 89-106 in-lbs)
- Suspension control arm, sway bar, tie rod end and ball joint torque
- Spark plug torque (typically 10-15 ft-lbs on aluminum heads — do not exceed)
- Differential cover bolts (RWD/4WD only) and transfer case fasteners
Repair guidance for this model year
For 2022 late-model work: Modern vehicles increasingly use aluminum body and suspension components. Aluminum fastener torque is typically 60-70% of equivalent steel torque, and aluminum threads strip easily. Use a calibrated torque wrench and apply anti-seize on any steel fastener threading into aluminum.
Tools you will need
- Metric socket set (8mm-22mm), 6-point impact-rated
- Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
- Breaker bar (24" minimum) for initial loosening
- Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
- Anti-seize on stainless or dissimilar-metal threads; thread-locker (Loctite blue) on critical reassembly
Frequently asked questions
What is the lug nut torque on a 2022 John Deere 310l?
The OEM-specified lug-nut torque for the 2022 John Deere 310l is 266 ft-lbs (360 Nm), using a 30mm socket on M20x2.5 thread studs. Use a calibrated torque wrench in a star pattern, in two passes (50% and 100%), and re-check after 50-100 miles of driving.
What socket size do I need for the 2022 John Deere 310l lug nuts?
The 2022 John Deere 310l uses a 30mm socket. A 6-point impact-rated socket is recommended over a 12-point chrome socket — 12-points round off lug nuts under impact-driver use.
Are the 2022 John Deere 310l fasteners metric or SAE?
Metric is the standard for this vehicle. Most fasteners on this vehicle are metric (M6, M8, M10, M12, M14). Bring a full metric set; SAE substitutes can round the head. Bolt-head markings are the fastest way to confirm grade and material at the bench.
Other John Deere 310l years
Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.
- 2024 John Deere 310l lug nut torque
- 2023 John Deere 310l lug nut torque
- 2021 John Deere 310l lug nut torque
- 2020 John Deere 310l lug nut torque
- 2019 John Deere 310l lug nut torque
- 2018 John Deere 310l lug nut torque
- 2017 John Deere 310l lug nut torque
- 2016 John Deere 310l lug nut torque
- 2015 John Deere 310l lug nut torque
- 2014 John Deere 310l lug nut torque
→ 2022 John Deere 310l oil drain plug torque & size
All 7 2022 John Deere 310l fastener specs
Per-bolt torque, wrench size, and thread spec for the 2022 John Deere 310l, sourced from OEM service literature and verified against community shop data. Values pair imperial (ft-lb) and metric (Nm) where the manufacturer publishes both. 2 of the 7 fastener specs on this page are independently verified against OEM service manuals and manufacturer torque data (last reviewed June 2026).
Wheels — 2022 John Deere 310l
Wheel and lug nut spec for the 2022 John Deere 310l. For the wheels, plan for a 30mm tool on a M20x2.5 stud; final torque is 266 ft-lbs (360 Nm) (wheel lug nut (rear)). Confirmed against manufacturer service literature. Wheel lug nut (front) tightens to 266 ft-lbs (360 Nm), takes a 30mm driver, runs on M20x2.5 threads, located at the wheels. This figure is independently verified against OEM service data.
Engine — 2022 John Deere 310l
Engine bolt-by-bolt torque for the 2022 John Deere 310l, including the long block, valve covers, and intake. Engine oil drain plug tightens to 37 ft-lbs (50 Nm), takes a 27mm driver, runs on M22x1.5 threads, located at the engine.
Drivetrain — 2022 John Deere 310l
Drivetrain and driveline fasteners for the 2022 John Deere 310l — axle, transmission, and differential plugs. The axle hub nut (front) uses a See notes drive on a M36x2.0 thread, torqued to 370 ft-lbs at the drivetrain.
Body — 2022 John Deere 310l
Body fasteners on the 2022 John Deere 310l. At the body, the rops mounting bolt torques to 266 ft-lbs (30mm drive, M20x2.5 thread).
Attachment — 2022 John Deere 310l
Attachment fasteners on the 2022 John Deere 310l. For the attachment, plan for a 30mm tool on a M20x2.5 stud; final torque is 266 ft-lbs (backhoe swing tower bolt). Loader boom pivot pin bolt tightens to 266 ft-lbs, takes a 30mm driver, runs on M20x2.5 threads, located at the attachment.
New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then use the 2022 John Deere 310l numbers above.
Loading the interactive 2022 John Deere 310l fastener lookup with per-bolt filtering, part links, and torque tools…