2008 Acura TL Bolt Sizes & Torque Specs
Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.
Tools for this job
Matched to the specs on this page.
As an Amazon Associate I earn from qualifying purchases. Tool picks are general options, not a fit guarantee for your vehicle or fastener.
- 1/2" Drive Click Torque Wrench (10–150 ft-lb)Lug nuts: Check its range includes your spec before ordering.EPAuto 1/2" Drive Click Torque Wrench, 10–150 ft-lb — view on Amazon
- Lug Nut Socket Set (17/19/21/22 mm)Lug nuts: Wheel-protective sleeves. Measure your lug nut first; this set covers 17, 19, 21 and 22 mm.MIXPOWER 1/2"-Drive Wheel Protector Thin-Wall Deep Lug Socket Set (4-pc) — view on Amazon
Every value on this page for the 2008 Acura TL names the document it was checked against. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.
Honda and Acura platforms often reuse lug-thread conventions across related models, but the socket and torque must come from this vehicle's own record. Do not substitute a common import socket size for a measured lug nut.
Common fastener categories on the 2008 Acura TL
- Wheel / lug nut torque and thread spec (covered above)
- Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
- Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
- Transmission pan, valve cover, and intake manifold bolts where the database has exact records
- Suspension control arm, sway bar, tie rod end and ball joint torque
- Spark plug torque only when a vehicle-specific spark-plug row is available
- Differential cover bolts (RWD/4WD only) and transfer case fasteners
Repair guidance for this model year
For 2008 model-year work: Always use a calibrated torque wrench for safety-critical fasteners, and replace lock washers and crush washers on every reassembly.
Tools you will need
- Metric and SAE socket set (8mm-22mm plus 1/4"-7/8"), 6-point impact-rated
- Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
- Breaker bar (24" minimum) for initial loosening
- Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
- Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them
Frequently asked questions
Are the 2008 Acura TL fasteners metric or SAE?
Metric and SAE hardware can both appear on one vehicle, depending on the component and exact application. Use the individually verified field and the actual fastener or service manual rather than inferring a standard from the model year, make or generation. Bolt-head markings can help identify the hardware at the bench.
Not yet verified for the 2008 Acura TL: lug nut torque and lug nut socket size. Check your owner’s or service manual, or ask a dealer. Send a correction
Other Acura TL years
Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.
- 2014 Acura TL lug nut torque
- 2013 Acura TL lug nut torque
- 2012 Acura TL lug nut torque
- 2011 Acura TL lug nut torque
- 2010 Acura TL lug nut torque
- 2009 Acura TL lug nut torque
- 2007 Acura TL lug nut torque
- 2006 Acura TL lug nut torque
- 2005 Acura TL lug nut torque
- 2004 Acura TL lug nut torque
→ 2008 Acura TL suspension & steering torque specs (control arm, ball joint, tie rod)
Fasteners on record for the 2008 Acura TL
None of the 12 fasteners on record for the 2008 Acura TL has a value checked against a maker’s document yet, so no figures are shown.
Also on record but not yet checked against a maker’s document (12): Front Caliper Bracket Bolt, Front Caliper Slide Pin, Front Lower Control Arm Bolt, Front Strut Top Nut, Lug Nut, Oil Drain Plug, Oil Filter, Rear Caliper Bracket Bolt, Rear Caliper Slide Pin, Rear Lower Control Arm Bolt, Spark Plug, Transmission Drain Plug. Their stored figures are not shown until a document confirms them. Have the factory figure? Send a correction.
New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.
Loading the interactive 2008 Acura TL fastener lookup with per-bolt filtering, part links, and torque tools…