2005 Chevrolet Corvette Bolt Sizes & Torque Specs

Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.

Where these numbers come from

1 value for the 2005 Chevrolet Corvette is checked against a maker’s document. Each row names the document, the page or section and the manual’s own wording, so you can check it yourself.

SpecValueDocument and pageManual wordingApplies to
Rear Axle Nut — torque151 ft-lbs (205 Nm)SKF Torque specification guide 2023 - Front & rear axle nut, hub mount and lug nut torque specifications, p. PDF p. 11 · cdn.skfmediahub.skf.com“SKF 2023 torque guide p.11, CHEVROLET: Corvette 2005-2013, front -, rear 151/205”Rear axle/half-shaft nut torque as printed by SKF for this make/model/year; no procedure footnote printed by SKF for this row. Applies to: trim: C6; axle: rear (1 configuration).

Latest proof checked 2026-10-23. Values that changed after a check are listed in the corrections log.

Tools for this job

Matched to the specs on this page.

As an Amazon Associate I earn from qualifying purchases. Tool picks are general options, not a fit guarantee for your vehicle or fastener.

Every value on this page for the 2005 Chevrolet Corvette names the document it was checked against. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

Frequently asked questions

Are the 2005 Chevrolet Corvette fasteners metric or SAE?

Metric and SAE hardware can both appear on one vehicle, depending on the component and exact application. Use the individually verified field and the actual fastener or service manual rather than inferring a standard from the model year, make or generation. Bolt-head markings can help identify the hardware at the bench.

Not yet verified for the 2005 Chevrolet Corvette: lug nut torque and lug nut socket size. Check your owner’s or service manual, or ask a dealer. Send a correction

Other Chevrolet Corvette years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

Fasteners on record for the 2005 Chevrolet Corvette

1 of the 10 fasteners on record for the 2005 Chevrolet Corvette has at least one value checked against a maker’s document; each sentence below names it. A checked torque does not confirm the socket size, thread or part number. Where sources disagree, the value is withheld.

Drivetrain — 2005 Chevrolet Corvette

Drivetrain fasteners checked against a maker’s document for the 2005 Chevrolet Corvette. Rear Axle Nut (Axle Shaft End). Torque: 151 ft-lbs (205 Nm). Source: SKF Torque specification guide 2023 - Front & rear axle nut, hub mount and lug nut torque specifications, p. PDF p. 11. Rear axle/half-shaft nut torque as printed by SKF for this make/model/year; no procedure footnote printed by SKF for this row trim: C6; axle: rear

Also on record but not yet checked against a maker’s document (9): Exhaust Manifold to Head Bolt, Front Brake Caliper Guide Pin Bolt, Front Bumper Fascia Upper Bolt, LS3 Crankshaft Pulley Bolt, LS3 Intake Manifold Bolt, LS3 Throttle Body Bolt, LS3 Water Pump Bolt, Lug Nut, Oil Drain Plug. Their stored figures are not shown until a document confirms them. Have the factory figure? Send a correction.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.

Loading the interactive 2005 Chevrolet Corvette fastener lookup with per-bolt filtering, part links, and torque tools…