2007 Chevrolet Corvette Bolt Sizes & Torque Specs

Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.

This page distinguishes source-backed fields, unresolved conflicts and unverified legacy records for the 2007 Chevrolet Corvette. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

GM passenger cars, crossovers and trucks use different wheel hardware families, including seat-style differences that matter when buying aftermarket lugs. Match the listed row and the original seat type; do not infer a truck value from a car, or the reverse.

Common fastener categories on the 2007 Chevrolet Corvette

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
Transmission pan, valve cover, and intake manifold bolts where the database has exact records
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque only when a vehicle-specific spark-plug row is available
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2007 model-year work: Always use a calibrated torque wrench for safety-critical fasteners, and replace lock washers and crush washers on every reassembly.

Tools you will need

Metric socket set (8mm-22mm), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them

Frequently asked questions

What is the lug nut torque on a 2007 Chevrolet Corvette?

Specification not verified for this lug nut summary. Do not substitute another model year's value.

What socket size do I need for the 2007 Chevrolet Corvette lug nuts?

Confirm the socket against the actual lug nut; no size is assumed here.

Are the 2007 Chevrolet Corvette fasteners metric or SAE?

Metric is the standard for this vehicle. Most fasteners on this vehicle are metric (M6, M8, M10, M12, M14). Bring a full metric set; SAE substitutes can round the head. Bolt-head markings are the fastest way to confirm grade and material at the bench.

Other Chevrolet Corvette years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2007 Chevrolet Corvette oil drain plug torque & size

All 13 2007 Chevrolet Corvette fastener specs

Per-field evidence and legacy records for the 2007 Chevrolet Corvette. A verified torque does not verify socket size, thread or part number. Unverified records are not installation instructions; conflicting specifications are withheld. 1 of the 13 records carry legacy review labels (last reviewed June 2026); those labels do not verify individual fields.

Wheels — 2007 Chevrolet Corvette

Wheel and lug nut spec for the 2007 Chevrolet Corvette. Lug Nut (All wheels). Torque: 100 ft-lbs (135 Nm) (legacy record, unverified). Socket size: not verified. Thread: M12x1.5 (legacy record, unverified). Part number: 84639994 (legacy record, unverified).

Brakes — 2007 Chevrolet Corvette

Brake fasteners on the 2007 Chevrolet Corvette — caliper bracket, slide pins, and banjo bolt torque follow. Front Brake Caliper Guide Pin Bolt (Caliper to Bracket). Torque: 23 ft-lbs (legacy record, unverified). Socket size: 14mm (legacy record, unverified). Thread: n/a (legacy record, unverified). Part number: not verified.

Engine — 2007 Chevrolet Corvette

Engine bolt-by-bolt torque for the 2007 Chevrolet Corvette, including the long block, valve covers, and intake. Spark Plug. Torque: 11 ft-lbs (15 Nm) (legacy record, unverified). Socket size: 9/16" (legacy record, unverified). Thread: M14x1.25 (legacy record, unverified). Part number: not verified. Crankshaft Pulley Bolt. Torque: 37 ft-lbs + 140° turn (LS2/LS3) (legacy record, unverified). Socket size: 24mm (legacy record, unverified). Thread: M18x1.5 (legacy record, unverified). Part number: not verified. Cylinder Head Bolt (LS3). Torque: 22 ft-lbs + 90° + 70° turn (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M11x2.0 (legacy record, unverified). Part number: not verified. Throttle Body Bolt. Torque: 106 in-lbs (12 Nm) (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M6x1.0 (legacy record, unverified). Part number: not verified. Oil Drain Plug (Oil pan). Torque: 18 ft-lbs (25 Nm) (legacy record, unverified). Socket size: not verified. Thread: M12x1.75 (legacy record, unverified). Part number: 55577568 (legacy record, unverified).

Drivetrain — 2007 Chevrolet Corvette

Drivetrain and driveline fasteners for the 2007 Chevrolet Corvette — axle, transmission, and differential plugs. Rear Axle Nut (Axle Shaft End). Torque: 160 ft-lbs (legacy record, unverified). Socket size: 34mm (legacy record, unverified). Thread: n/a (legacy record, unverified). Part number: not verified.

Steering — 2007 Chevrolet Corvette

Steering linkage fasteners on the 2007 Chevrolet Corvette. Power Steering Pump Bolt. Torque: 25 ft-lbs (34 Nm) (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified.

Exhaust — 2007 Chevrolet Corvette

Exhaust fasteners on the 2007 Chevrolet Corvette. Exhaust Manifold to Head Bolt (Manifold to Cylinder Head). Torque: 11 ft-lbs (1st pass), 18 ft-lbs (final) (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M10 x 1.5 (legacy record, unverified). Part number: not verified.

Engine Block — 2007 Chevrolet Corvette

Engine Block fasteners on the 2007 Chevrolet Corvette. LS3 Throttle Body Bolt (Throttle Body to Intake). Torque: 89 in-lbs (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M10 x 1.5 (legacy record, unverified). Part number: not verified. LS3 Water Pump Bolt (Water Pump to Block). Torque: 11 ft-lbs (1st pass), 22 ft-lbs (final) (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M10 x 1.5 (legacy record, unverified). Part number: not verified.

Exterior — 2007 Chevrolet Corvette

Exterior fasteners on the 2007 Chevrolet Corvette. Front Bumper Fascia Upper Bolt (Top of Fascia to Frame). Torque: 89 in-lbs (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: n/a (legacy record, unverified). Part number: not verified.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then use the 2007 Chevrolet Corvette numbers above.

Loading the interactive 2007 Chevrolet Corvette fastener lookup with per-bolt filtering, part links, and torque tools…