2014 Chevrolet Equinox Lug Nut Torque & Bolt Specs

The source-backed 2014 Chevrolet Equinox lug nut torque is 140 ft-lbs (190 Nm). Match the application and hardware conditions in the cited manual; do not assume the same value applies to aftermarket hardware.

Does this apply to my Equinox?

Yes — the same 140 ft-lbs (190 Nm) for every 2014 Chevrolet Equinox version we checked: 3 of 3 trim/engine versions, against the 2014 Chevrolet Equinox Owner Manual (GMNA-Localizing-U.S./Canada-6081479, 2014, CRC2 10/23/13), p. PDF p. 351 (printed 12-3).

Versions checked (3)
  • 2.4L L4 / 3.6L V6: LS, LT, LTZ

This figure assumes: OEM wheels and lug nuts as specified in the owner's manual.

Aftermarket wheels or lug nuts: use the wheel or lug-nut maker's figure.

Lug nut torque: 140 ft-lbs (190 Nm).

Where these numbers come from

2 values for the 2014 Chevrolet Equinox are checked against a maker’s document. Each row names the document, the page or section and the manual’s own wording, so you can check it yourself.

SpecValueDocument and pageManual wordingApplies to
Lug Nut — torque140 ft-lbs (190 Nm)2014 Chevrolet Equinox Owner Manual (GMNA-Localizing-U.S./Canada-6081479, 2014, CRC2 10/23/13), p. PDF p. 351 (printed 12-3) · experience.gm.com“Wheel Nut Torque 190 N•m 140 lb ft”OEM wheels and lug nuts as specified in the owner's manual. Applies to: 2.4L L4 / 3.6L V6: LS, LT, LTZ (3 configurations).
Valve Cover Bolt — torque89 in-lbs (10 Nm)GM-attributed 2014 Chevrolet Equinox service information mirror (LEMON Manuals): Engine Mechanical - 2.4L, Camshaft Cover Replacement (on vehicle), callout 1; Fastener Specifications table · lemon-manuals.la“Camshaft Cover Fastener (Qty: 11) ... Tighten 10 N.m (89 lb in) | Spec table: Cam Cover to Cylinder Head Bolt | 10 N.m | 89 lb in”Original GM camshaft cover bolts, every engine offered for the 2014 Equinox: 2.4L cover (11 bolts, no tightening order printed) and 3.6L V6 covers (13 right + 15 left, GM's numbered on-vehicle sequence: "Tighten the left camshaft cover bolts in the sequence shown to 10 N.m (89 lb in)."). New cover gasket; new grommets per GM. Not aftermarket covers. Applies to: 2.4L L4 / 3.6L V6: LS, LT, LTZ (3 configurations).

Latest proof checked 2026-11-06. Values that changed after a check are listed in the corrections log.

Tools for this job

Matched to the specs on this page.

As an Amazon Associate I earn from qualifying purchases. Tool picks are general options, not a fit guarantee for your vehicle or fastener.

Every value on this page for the 2014 Chevrolet Equinox names the document it was checked against. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

Working on the 2014 Chevrolet Equinox: What You Need to Know

Second generation (2010–2017)

The 2014 Equinox's second generation (2010–2017) is built on GM's Theta platform, with a 182-hp 2.4-liter Ecotec four-cylinder and, from 2013, an available 301-hp 3.6-liter V6.

Note that 2010–2013 2.4-liter cars are widely documented for high oil consumption tied to piston-ring wear, later covered by a GM settlement.

Frequently asked questions

What is the lug nut torque on a 2014 Chevrolet Equinox?

The source-backed lug-nut torque for the 2014 Chevrolet Equinox is 140 ft-lbs (190 Nm). Match the exact application, hardware and tightening conditions in the cited manual. Field evidence: Lug nut torque confirmed against 2014 Chevrolet Equinox Owner Manual (GMNA-Localizing-U.S./Canada-6081479, 2014, CRC2 10/23/13), p. PDF p. 351 (printed 12-3) (https://experience.gm.com/ownercenter/content/dam/gmownercenter/gmna/dynamic/manuals/2014/chevrolet/equinox/2014_chevrolet_equinox_owners.pdf). OEM wheels and lug nuts as specified in the owner's manual; engine: 2.4L L4 / 3.6L V6; trim: LS.

Does the 2014 Chevrolet Equinox lug nut torque depend on trim or engine?

No. We found the same 140 ft-lbs (190 Nm) for every 2014 Chevrolet Equinox version we checked: 3 of 3 trim/engine versions, against the 2014 Chevrolet Equinox Owner Manual (GMNA-Localizing-U.S./Canada-6081479, 2014, CRC2 10/23/13), p. PDF p. 351 (printed 12-3). This figure assumes: OEM wheels and lug nuts as specified in the owner's manual. Aftermarket wheels or lug nuts: use the wheel or lug-nut maker's figure.

Are the 2014 Chevrolet Equinox fasteners metric or SAE?

Metric and SAE hardware can both appear on one vehicle, depending on the component and exact application. Use the individually verified field and the actual fastener or service manual rather than inferring a standard from the model year, make or generation. Bolt-head markings can help identify the hardware at the bench.

Not yet verified for the 2014 Chevrolet Equinox: lug nut socket size. Check your owner’s or service manual, or ask a dealer. Send a correction

Other Chevrolet Equinox years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2014 Chevrolet Equinox suspension & steering torque specs (control arm, ball joint, tie rod)

Fasteners on record for the 2014 Chevrolet Equinox

2 of the 9 fasteners on record for the 2014 Chevrolet Equinox have at least one value checked against a maker’s document; each sentence below names it. A checked torque does not confirm the socket size, thread or part number. Where sources disagree, the value is withheld.

Wheels — 2014 Chevrolet Equinox

Wheel fasteners checked against a maker’s document for the 2014 Chevrolet Equinox. Lug Nut (All four wheels). Torque: 140 ft-lbs (190 Nm). Source: 2014 Chevrolet Equinox Owner Manual (GMNA-Localizing-U.S./Canada-6081479, 2014, CRC2 10/23/13), p. PDF p. 351 (printed 12-3). OEM wheels and lug nuts as specified in the owner's manual engine: 2.4L L4 / 3.6L V6; trim: LS

Engine — 2014 Chevrolet Equinox

Engine fasteners checked against a maker’s document for the 2014 Chevrolet Equinox. Valve Cover Bolt (Camshaft (valve) cover to cylinder head). Torque: 89 in-lbs (10 Nm). Source: GM-attributed 2014 Chevrolet Equinox service information mirror (LEMON Manuals): Engine Mechanical - 2.4L, Camshaft Cover Replacement (on vehicle), callout 1; Fastener Specifications table. Original GM camshaft cover bolts, every engine offered for the 2014 Equinox: 2.4L cover (11 bolts, no tightening order printed) and 3.6L V6 covers (13 right + 15 left, GM's numbered on-vehicle sequence: "Tighten the left camshaft cover bolts in the sequence shown to 10 N.m (89 lb in)."). New cover gasket; new grommets per GM. Not aftermarket covers. engine: 2.4L L4 / 3.6L V6; trim: LS

Also on record but not yet checked against a maker’s document (7): Front Brake Caliper Bracket Bolt, Front Brake Caliper Slide Pin, Front Hub/Bearing Nut, Oil Drain Plug, Spark Plug, Sway Bar End Link Nut, Tie Rod End Nut. Their stored figures are not shown until a document confirms them. Have the factory figure? Send a correction.

Valve cover fastener locations and tightening sequence — 2014 Chevrolet Equinox

2.4L 4-cylinder: 89 in-lbs (10 Nm)

  1. 11 cover bolts, all tightened to the same torque. Each is held in the cover by a retainer, so the bolts lift off with the cover and go back into the same holes.
  2. GM gives no tightening order: start every bolt by hand, then tighten each one to 89 in-lbs (10 Nm).
  3. Fit a new cover gasket and new cover grommets (and new bolts, if your bolts come with the grommet).
  4. Move the ignition-coil harness clips and the fuel line bracket over to the cover.

Other fasteners on this cover (studs, coil and bracket bolts):

  • Ignition coil bolts, one per coil (4): 89 in-lbs (10 Nm)
  • Camshaft housing cover insulator bolts: 89 in-lbs (10 Nm)
  • Ground cable bolt and ground cable stud: 89 in-lbs (10 Nm)
  • Ball studs that the plastic engine cover snaps onto (no torque printed)

Source: GM service information (2010–2017 Terrain and Equinox, 2.4L): Camshaft Cover Replacement, Camshaft Cover Installation, Fastener Specifications.

3.6L V6 (LFX): 89 in-lbs (10 Nm)

Right cover (bank 1): 13 bolts
12345678910111213
Left cover (bank 2, has the oil-fill cap): 15 bolts
OIL123456789101112131415
  1. Two covers: the right cover (bank 1) has 13 bolts, the left cover (bank 2, with the oil-fill cap) has 15.
  2. Fit new bolt grommets, then start every bolt by hand.
  3. Tighten in the numbered order to 89 in-lbs (10 Nm). This is GM's engine-in-car order; GM's engine-out procedure numbers the right cover differently.
  4. Put an 8 mm wide, 4 mm high bead of RTV sealant on the engine front cover split lines before setting each cover down.

Other fasteners on this cover (studs, coil and bracket bolts):

  • Ball stud on the left cover for the plastic fuel-injector cover: 89 in-lbs (10 Nm)

Source: GM service information (2013–2017 Terrain and Equinox, 2012–2017 Impala, 3.6L): Camshaft Cover Replacement, Left Side and Right Side.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.

Loading the interactive 2014 Chevrolet Equinox fastener lookup with per-bolt filtering, part links, and torque tools…