2015 Chevrolet Equinox Bolt Sizes & Torque Specs

Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.

This page distinguishes source-backed fields, unresolved conflicts and unverified legacy records for the 2015 Chevrolet Equinox. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

GM passenger cars, crossovers and trucks use different wheel hardware families, including seat-style differences that matter when buying aftermarket lugs. Match the listed row and the original seat type; do not infer a truck value from a car, or the reverse.

Second generation (2010–2017)

The 2015 Equinox's second generation (2010–2017) is built on GM's Theta platform, with a 182-hp 2.4-liter Ecotec four-cylinder and, from 2013, an available 301-hp 3.6-liter V6.

Second-generation wheels use a five-lug pattern with M14x1.5 studs. Note that 2010–2013 2.4-liter cars are widely documented for high oil consumption tied to piston-ring wear, later covered by a GM settlement.

Common fastener categories on the 2015 Chevrolet Equinox

• Wheel / lug nut torque and thread spec (covered above)
• Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
• Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
• Transmission pan, valve cover, and intake manifold bolts where the database has exact records
• Suspension control arm, sway bar, tie rod end and ball joint torque
• Spark plug torque only when a vehicle-specific spark-plug row is available
• Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2015 model-year work: This era introduced widespread torque-to-yield (TTY) bolts on head, main, and crank pulley fasteners. TTY bolts stretch permanently when torqued and must not be reused — the spec calls for a fresh bolt every time. Always verify TTY status against the FSM before reassembly.

Tools you will need

• Metric and SAE socket set (8mm-22mm plus 1/4"-7/8"), 6-point impact-rated
• Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
• Breaker bar (24" minimum) for initial loosening
• Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
• Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them

Frequently asked questions

Other Chevrolet Equinox years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

• 2023 Chevrolet Equinox lug nut torque
• 2022 Chevrolet Equinox lug nut torque
• 2021 Chevrolet Equinox lug nut torque
• 2020 Chevrolet Equinox lug nut torque
• 2019 Chevrolet Equinox lug nut torque
• 2018 Chevrolet Equinox lug nut torque
• 2017 Chevrolet Equinox lug nut torque
• 2016 Chevrolet Equinox lug nut torque
• 2014 Chevrolet Equinox lug nut torque
• 2013 Chevrolet Equinox lug nut torque
• 2012 Chevrolet Equinox lug nut torque
• 2011 Chevrolet Equinox lug nut torque
• 2010 Chevrolet Equinox lug nut torque
• 2009 Chevrolet Equinox lug nut torque
• 2008 Chevrolet Equinox lug nut torque
• 2007 Chevrolet Equinox lug nut torque

→ 2015 Chevrolet Equinox oil drain plug torque & size

→ 2015 Chevrolet Equinox suspension & steering torque specs (control arm, ball joint, tie rod)

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.

Loading the interactive 2015 Chevrolet Equinox fastener lookup with per-bolt filtering, part links, and torque tools…