2013 Chevrolet Impala Bolt Sizes & Torque Specs
Does this apply to my Impala?
Checked for 3.6L V6: Base — 100 ft-lbs (140 Nm) — against the 2013 Chevrolet Impala Owner Manual, p. PDF p. 312 (printed 12-2).
Not checked against the manual yet: 3.5L V6: Base.
This figure assumes: OEM wheels and lug nuts as specified in the owner's manual.
Aftermarket wheels or lug nuts: use the wheel or lug-nut maker's figure.
Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.
Where these numbers come from
2 values for the 2013 Chevrolet Impala are checked against a maker’s document. Each row names the document, the page or section and the manual’s own wording, so you can check it yourself.
| Spec | Value | Document and page | Manual wording | Applies to |
|---|---|---|---|---|
| Lug Nut — torque | 100 ft-lbs (140 Nm) | 2013 Chevrolet Impala Owner Manual, p. PDF p. 312 (printed 12-2) · experience.gm.com | “Wheel Nut Torque 140 N•m 100 lb ft” | OEM wheels and lug nuts as specified in the owner's manual. Applies to: 3.6L V6: Base (1 configuration). |
| Valve Cover Bolt — torque | 89 in-lbs (10 Nm) | GM-attributed 2013 Chevrolet Impala service information mirror (LEMON Manuals): 3.6L V6, Camshaft Cover Replacement (on vehicle); Fastener Specifications table · lemon-manuals.la | “Tighten the left camshaft cover bolts in the sequence shown to 10 N.m (89 lb in) | Spec table: Camshaft Cover Bolt | 10 N.m | 89 lb in” | Original GM camshaft cover bolts on the 2013 Impala 3.6L V6. All print 10 N.m (89 lb in). 3.6L V6: "Tighten the left camshaft cover bolts in the sequence shown to 10 N.m (89 lb in)". New gasket/grommets per GM. Not aftermarket covers. Applies to: 3.6L V6: Base (1 configuration). |
Tools for this job
Matched to the specs on this page.
As an Amazon Associate I earn from qualifying purchases. Tool picks are general options, not a fit guarantee for your vehicle or fastener.
- 1/2" Drive Click Torque Wrench (10–150 ft-lb)Lug nuts: Check its range includes your spec before ordering.EPAuto 1/2" Drive Click Torque Wrench, 10–150 ft-lb — view on Amazon
- Lug Nut Socket Set (17/19/21/22 mm)Lug nuts: Wheel-protective sleeves. Measure your lug nut first; this set covers 17, 19, 21 and 22 mm.MIXPOWER 1/2"-Drive Wheel Protector Thin-Wall Deep Lug Socket Set (4-pc) — view on Amazon
Every value on this page for the 2013 Chevrolet Impala names the document it was checked against. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.
GM passenger cars, crossovers and trucks use different wheel hardware families, including seat-style differences that matter when buying aftermarket lugs. Match the listed row and the original seat type; do not infer a truck value from a car, or the reverse.
Common fastener categories on the 2013 Chevrolet Impala
- Wheel / lug nut torque and thread spec (covered above)
- Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
- Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
- Transmission pan, valve cover, and intake manifold bolts where the database has exact records
- Suspension control arm, sway bar, tie rod end and ball joint torque
- Spark plug torque only when a vehicle-specific spark-plug row is available
- Differential cover bolts (RWD/4WD only) and transfer case fasteners
Repair guidance for this model year
For 2013 model-year work: This era introduced widespread torque-to-yield (TTY) bolts on head, main, and crank pulley fasteners. TTY bolts stretch permanently when torqued and must not be reused — the spec calls for a fresh bolt every time. Always verify TTY status against the FSM before reassembly.
Tools you will need
- Metric and SAE socket set (8mm-22mm plus 1/4"-7/8"), 6-point impact-rated
- Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
- Breaker bar (24" minimum) for initial loosening
- Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
- Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them
Frequently asked questions
Are the 2013 Chevrolet Impala fasteners metric or SAE?
Metric and SAE hardware can both appear on one vehicle, depending on the component and exact application. Use the individually verified field and the actual fastener or service manual rather than inferring a standard from the model year, make or generation. Bolt-head markings can help identify the hardware at the bench.
Not yet verified for the 2013 Chevrolet Impala: lug nut torque and lug nut socket size. Check your owner’s or service manual, or ask a dealer. Send a correction
Other Chevrolet Impala years
Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.
- 2020 Chevrolet Impala lug nut torque
- 2019 Chevrolet Impala lug nut torque
- 2018 Chevrolet Impala lug nut torque
- 2017 Chevrolet Impala lug nut torque
- 2016 Chevrolet Impala lug nut torque
- 2015 Chevrolet Impala lug nut torque
- 2014 Chevrolet Impala lug nut torque
- 2012 Chevrolet Impala lug nut torque
- 2011 Chevrolet Impala lug nut torque
- 2010 Chevrolet Impala lug nut torque
- 2009 Chevrolet Impala lug nut torque
- 2008 Chevrolet Impala lug nut torque
- 2007 Chevrolet Impala lug nut torque
- 2006 Chevrolet Impala lug nut torque
Fasteners on record for the 2013 Chevrolet Impala
2 of the 8 fasteners on record for the 2013 Chevrolet Impala have at least one value checked against a maker’s document; each sentence below names it. A checked torque does not confirm the socket size, thread or part number. Where sources disagree, the value is withheld.
Wheels — 2013 Chevrolet Impala
Wheel fasteners checked against a maker’s document for the 2013 Chevrolet Impala. Lug Nut (All wheels). Torque: 100 ft-lbs (140 Nm). Source: 2013 Chevrolet Impala Owner Manual, p. PDF p. 312 (printed 12-2). OEM wheels and lug nuts as specified in the owner's manual engine: 3.6L V6; trim: Base
Engine — 2013 Chevrolet Impala
Engine fasteners checked against a maker’s document for the 2013 Chevrolet Impala. Valve Cover Bolt (Camshaft (valve) cover to cylinder head). Torque: 89 in-lbs (10 Nm). Source: GM-attributed 2013 Chevrolet Impala service information mirror (LEMON Manuals): 3.6L V6, Camshaft Cover Replacement (on vehicle); Fastener Specifications table. Original GM camshaft cover bolts on the 2013 Impala 3.6L V6. All print 10 N.m (89 lb in). 3.6L V6: "Tighten the left camshaft cover bolts in the sequence shown to 10 N.m (89 lb in)". New gasket/grommets per GM. Not aftermarket covers. engine: 3.6L V6; trim: Base
Also on record but not yet checked against a maker’s document (6): Engine Mount Through Bolt, Exhaust Manifold Bolt, Lower Control Arm Rear Bolt, Oil Drain Plug, Spark Plug, Water Pump Bolt. Their stored figures are not shown until a document confirms them. Have the factory figure? Send a correction.
Valve cover fastener locations and tightening sequence — 2013 Chevrolet Impala
3.6L V6 (LFX): 89 in-lbs (10 Nm)
- Two covers: the right cover (bank 1) has 13 bolts, the left cover (bank 2, with the oil-fill cap) has 15.
- Fit new bolt grommets, then start every bolt by hand.
- Tighten in the numbered order to 89 in-lbs (10 Nm). This is GM's engine-in-car order; GM's engine-out procedure numbers the right cover differently.
- Put an 8 mm wide, 4 mm high bead of RTV sealant on the engine front cover split lines before setting each cover down.
Other fasteners on this cover (studs, coil and bracket bolts):
- Ball stud on the left cover for the plastic fuel-injector cover: 89 in-lbs (10 Nm)
Source: GM service information (2013–2017 Terrain and Equinox, 2012–2017 Impala, 3.6L): Camshaft Cover Replacement, Left Side and Right Side.
New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.
Loading the interactive 2013 Chevrolet Impala fastener lookup with per-bolt filtering, part links, and torque tools…