2013–2017 Dacia Sandero Bolt Sizes & Torque Specs

Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.

Every value on this page for the 2017 Dacia Sandero names the document it was checked against. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

These specifications also apply to the 2013, 2014, 2015 and 2016 model years — identical specs on file for each year.

For the 2017 Dacia Sandero, fasteners follow application-specific metric or SAE standards typical of late-model Dacia engineering. Always confirm spec against the factory service manual before tightening safety-critical fasteners (suspension, brake, steering, head bolts).

Common fastener categories on the 2017 Dacia Sandero

Repair guidance for this model year

For 2017 model-year work: This era introduced widespread torque-to-yield (TTY) bolts on head, main, and crank pulley fasteners. TTY bolts stretch permanently when torqued and must not be reused — the spec calls for a fresh bolt every time. Always verify TTY status against the FSM before reassembly.

Tools you will need

Frequently asked questions

Are the 2017 Dacia Sandero fasteners metric or SAE?

Metric and SAE hardware can both appear on one vehicle, depending on the component and exact application. Use the individually verified field and the actual fastener or service manual rather than inferring a standard from the model year, make or generation. Bolt-head markings can help identify the hardware at the bench.

Not yet verified for the 2017 Dacia Sandero: lug nut torque and lug nut socket size. Check your owner’s or service manual, or ask a dealer. Send a correction

Other Dacia Sandero years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2017 Dacia Sandero suspension & steering torque specs (control arm, ball joint, tie rod)

Fasteners on record for the 2017 Dacia Sandero

None of the 14 fasteners on record for the 2017 Dacia Sandero has a value checked against a maker’s document yet, so no figures are shown.

Also on record but not yet checked against a maker’s document (14): Ball Joint Pinch Bolt, Brake Caliper Bolts, Brake Caliper Slide Pins, Cylinder Head Bolts, Front Control Arm Bolts, Ignition Coil Bolts, Oil Drain Plug, Oil Filter, Rear Axle Beam Bolts, Shock Absorber Lower Bolt, Spark Plugs, Transmission Drain Plug, Valve Cover Bolts, Wheel Nuts. Their stored figures are not shown until a document confirms them. Have the factory figure? Send a correction.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.

Loading the interactive 2017 Dacia Sandero fastener lookup with per-bolt filtering, part links, and torque tools…