2016 Ford Fiesta Bolt Sizes & Torque Specs

Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.

This page distinguishes source-backed fields, unresolved conflicts and unverified legacy records for the 2016 Ford Fiesta. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

Ford torque and wheel-hardware specs vary sharply by chassis, especially between passenger cars, half-ton trucks and Super Duty trucks. Match the exact application and resolve source conflicts before tightening; a legacy database row is not authoritative evidence.

Common fastener categories on the 2016 Ford Fiesta

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
Transmission pan, valve cover, and intake manifold bolts where the database has exact records
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque only when a vehicle-specific spark-plug row is available
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2016 model-year work: This era introduced widespread torque-to-yield (TTY) bolts on head, main, and crank pulley fasteners. TTY bolts stretch permanently when torqued and must not be reused — the spec calls for a fresh bolt every time. Always verify TTY status against the FSM before reassembly.

Tools you will need

Metric socket set (8mm-22mm), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them

Frequently asked questions

What is the lug nut torque on a 2016 Ford Fiesta?

Specification not verified for this lug nut summary. Do not substitute another model year's value.

What socket size do I need for the 2016 Ford Fiesta lug nuts?

Confirm the socket against the actual lug nut; no size is assumed here.

Are the 2016 Ford Fiesta fasteners metric or SAE?

Metric is the standard for this vehicle. Most fasteners on this vehicle are metric (M6, M8, M10, M12, M14). Bring a full metric set; SAE substitutes can round the head. Bolt-head markings are the fastest way to confirm grade and material at the bench.

Other Ford Fiesta years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2016 Ford Fiesta suspension & steering torque specs (control arm, ball joint, tie rod)

All 19 2016 Ford Fiesta fastener specs

Per-field evidence and legacy records for the 2016 Ford Fiesta. A verified torque does not verify socket size, thread or part number. Unverified records are not installation instructions; conflicting specifications are withheld.

Brakes — 2016 Ford Fiesta

Brake fasteners on the 2016 Ford Fiesta — caliper bracket, slide pins, and banjo bolt torque follow. Front Brake Caliper Bolt (Caliper to Knuckle). Torque: 115 Nm (85 lb-ft) (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M12x1.75 (legacy record, unverified). Part number: not verified. Rear Brake Drum Screw (Securing Drum to Hub). Torque: 10 Nm (89 lb-in) (legacy record, unverified). Socket size: T30 Torx (legacy record, unverified). Thread: M6x1.0 (legacy record, unverified). Part number: not verified. Wheel Lug Nut (Wheel Hub). Torque: 100 ft-lbs (135 Nm) (legacy record, unverified). Socket size: 19mm (legacy record, unverified). Thread: M12x1.5 (legacy record, unverified). Part number: not verified.

Engine — 2016 Ford Fiesta

Engine bolt-by-bolt torque for the 2016 Ford Fiesta, including the long block, valve covers, and intake. Turbocharger to Manifold Nut (Turbo to Exhaust Manifold). Torque: 25 Nm (18 lb-ft) (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Intake Manifold Bolt (Intake Manifold to Head). Torque: 18 Nm (13 lb-ft) (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified. Crankshaft Pulley Bolt (Crankshaft). Torque: 100 Nm + 90 degrees (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M12x1.5 (legacy record, unverified). Part number: not verified. Valve Cover Bolt (Valve Cover). Torque: 10 Nm (89 lb-in) (legacy record, unverified). Socket size: 8mm (legacy record, unverified). Thread: M6x1.0 (legacy record, unverified). Part number: not verified. Spark Plug (Cylinder Head). Torque: 12 Nm (9 lb-ft) (legacy record, unverified). Socket size: 16mm (legacy record, unverified). Thread: M12x1.25 (legacy record, unverified). Part number: not verified. Oil Drain Plug (Oil Pan). Torque: 28 Nm (21 lb-ft) (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M12x1.75 (legacy record, unverified). Part number: EJ7Z-6730-B (legacy record, unverified). Exhaust Manifold Nut (Exhaust Manifold to Head). Torque: 16 Nm (12 lb-ft) (legacy record, unverified). Socket size: 13mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified.

Suspension — 2016 Ford Fiesta

Suspension and chassis fastener torque for the 2016 Ford Fiesta — strut, control arm, and sway bar values. Front Strut Top Mount Nut (Top of Strut Tower). Torque: 48 Nm (35 lb-ft) (legacy record, unverified). Socket size: 21mm (legacy record, unverified). Thread: M14x1.5 (legacy record, unverified). Part number: not verified. Rear Shock Absorber Lower Bolt (Lower Shock Mount to Axle). Torque: 120 Nm (89 lb-ft) (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M12x1.75 (legacy record, unverified). Part number: not verified. Front Strut to Knuckle Bolt (Strut to Steering Knuckle). Torque: 90 Nm + 45 degrees (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M12x1.5 (legacy record, unverified). Part number: not verified. Rear Shock Absorber Upper Bolt (Upper Shock Mount). Torque: 48 Nm (35 lb-ft) (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified. Sway Bar End Link Nut (End Link to Strut/Sway Bar). Torque: 48 Nm (35 lb-ft) (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified.

Steering — 2016 Ford Fiesta

Steering linkage fasteners on the 2016 Ford Fiesta. Tie Rod End Nut (Tie Rod to Steering Knuckle). Torque: 48 Nm (35 lb-ft) (legacy record, unverified). Socket size: 18mm (legacy record, unverified). Thread: M12x1.75 (legacy record, unverified). Part number: not verified.

Exhaust — 2016 Ford Fiesta

Exhaust fasteners on the 2016 Ford Fiesta. Downpipe to Turbo Nut (Downpipe V-Band). Torque: 18 Nm (13 lb-ft) (legacy record, unverified). Socket size: 15mm (legacy record, unverified). Thread: M10x1.5 (legacy record, unverified). Part number: not verified.

Cooling System — 2016 Ford Fiesta

Cooling System fasteners on the 2016 Ford Fiesta. Thermostat Housing Bolt (Thermostat Housing). Torque: 10 Nm (89 lb-in) (legacy record, unverified). Socket size: 8mm (legacy record, unverified). Thread: M6x1.0 (legacy record, unverified). Part number: not verified. Water Pump Bolt (Water Pump to Block). Torque: 20 Nm (15 lb-ft) (legacy record, unverified). Socket size: 10mm (legacy record, unverified). Thread: M8x1.25 (legacy record, unverified). Part number: not verified.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then use the 2016 Ford Fiesta numbers above.

Loading the interactive 2016 Ford Fiesta fastener lookup with per-bolt filtering, part links, and torque tools…