2016 Peugeot 2008 Bolt Sizes & Torque Specs

Lug nut torque is not verified for this summary. Review the cited evidence and exact hardware application before installation.

This page distinguishes source-backed fields, unresolved conflicts and unverified legacy records for the 2016 Peugeot 2008. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

For the 2016 Peugeot 2008, fasteners follow application-specific metric or SAE standards typical of late-model Peugeot engineering. Always confirm spec against the factory service manual before tightening safety-critical fasteners (suspension, brake, steering, head bolts).

Common fastener categories on the 2016 Peugeot 2008

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket, mounting, and slide/guide-pin bolts are different fasteners. Confirm the exact axle, application and service-manual specification before reassembly.
Engine oil drain plug torque and tool size when this vehicle has a verified drain-plug record
Transmission pan, valve cover, and intake manifold bolts where the database has exact records
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque only when a vehicle-specific spark-plug row is available
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2016 model-year work: This era introduced widespread torque-to-yield (TTY) bolts on head, main, and crank pulley fasteners. TTY bolts stretch permanently when torqued and must not be reused — the spec calls for a fresh bolt every time. Always verify TTY status against the FSM before reassembly.

Tools you will need

Metric and SAE socket set (8mm-22mm plus 1/4"-7/8"), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Replacement washers, threadlocker, anti-seize, or dry-thread preparation only when the exact service procedure specifies them

Frequently asked questions

What is the lug nut torque on a 2016 Peugeot 2008?

Specification not verified for this lug nut summary. Do not substitute another model year's value.

What socket size do I need for the 2016 Peugeot 2008 lug nuts?

Confirm the socket against the actual lug nut; no size is assumed here.

Are the 2016 Peugeot 2008 fasteners metric or SAE?

Metric and SAE hardware can both appear on one vehicle, depending on the component and exact application. Use the individually verified field and the actual fastener or service manual rather than inferring a standard from the model year, make or generation. Bolt-head markings can help identify the hardware at the bench.

Other Peugeot 2008 years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2016 Peugeot 2008 suspension & steering torque specs (control arm, ball joint, tie rod)

14 recorded 2016 Peugeot 2008 fasteners

Per-field evidence and legacy records for the 2016 Peugeot 2008. A verified torque does not verify socket size, thread or part number. Unverified records are not installation instructions; conflicting specifications are withheld. 3 of the 14 records carry legacy review labels (last reviewed June 2026); those labels do not verify individual fields.

Drivetrain — 2016 Peugeot 2008

Drivetrain fastener records and field evidence for the 2016 Peugeot 2008. Manual Transmission Drain (Drivetrain). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Engine - Ignition — 2016 Peugeot 2008

Engine - Ignition fasteners on the 2016 Peugeot 2008. Ignition Coil Bolts (Engine - Ignition). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Spark Plugs (Engine - Ignition). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Suspension - Front — 2016 Peugeot 2008

Suspension - Front fasteners on the 2016 Peugeot 2008. Front Strut Upper Mount (Suspension - Front). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Ball Joint Clamp Bolt (Suspension - Front). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Front Control Arm Bolts (Suspension - Front). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Engine - Cylinder Head — 2016 Peugeot 2008

Engine - Cylinder Head fasteners on the 2016 Peugeot 2008. Cylinder Head Bolts (Engine - Cylinder Head). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Wheel Hardware — 2016 Peugeot 2008

Wheel Hardware fasteners on the 2016 Peugeot 2008. Wheel Nuts (Wheel Hardware). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Engine - Valve Train — 2016 Peugeot 2008

Engine - Valve Train fasteners on the 2016 Peugeot 2008. Valve Cover Bolts (Engine - Valve Train). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Brake System — 2016 Peugeot 2008

Brake System fasteners on the 2016 Peugeot 2008. Brake Slide Pins (Brake System). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Brake Caliper Bolts (Brake System). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Engine - Oil System — 2016 Peugeot 2008

Engine - Oil System fasteners on the 2016 Peugeot 2008. Oil Filter Housing (Engine - Oil System). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified. Oil Drain Plug (Engine - Oil System). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

Suspension - Rear — 2016 Peugeot 2008

Suspension - Rear fasteners on the 2016 Peugeot 2008. Rear Torsion Beam Bolts (Suspension - Rear). Torque: not verified. Socket size: not verified. Thread: not verified. Part number: not verified.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.

Loading the interactive 2016 Peugeot 2008 fastener lookup with per-bolt filtering, part links, and torque tools…