John Deere Compact Tractor Torque Specs

OEM wheel-bolt torque specifications for John Deere's 1-, 2-, and 3-Series compact utility tractors, cited to the exact Operator's Manual and serial-number range for every figure. John Deere revises these specs at specific serial-number breaks — not always at a model-year boundary — and the 2025R/2032R line has manuals that genuinely disagree with each other. Always check your own tractor's serial number plate before torquing.

Quick-reference torque specs

Wheel Bolt — 1023E, serial 010001– (pre-HJ100001) 120 N·m (89 lb-ft) (Front and rear identical. Confirmed across three North American serial ranges: 010001-209999, 210000-309999, and 310001- (in the manual it shares with the early 1025R). Superseded at the HJ100001 serial break — see the 1023E/1025R HJ100001 row below.) Source: John Deere OMLVU24604 (1023E/1026R 010001-209999) p.61: "Tighten front wheel bolts alternately to 120 N•m (89 lb-ft)." / "Tighten rear wheel bolts alternately to 120 N•m (89 lb-ft)."; confirmed identically worded in OMLVU25251 (210000-309999) p.70 and OMLVU25849 (1023E 310001-/1025R 110001-) p.14-3. Wheel Bolt — 1026R, serial 010001–309999 120 N·m (89 lb-ft) (Confirmed for both published 1026R serial ranges (010001-209999 and 210000-309999). 1026R does not appear in any later (310001-/HJ100001-) combined manual title found in this pass, so no claim is made about it past serial 309999.) Source: John Deere OMLVU24604 (1023E/1026R 010001-209999) p.61, OMLVU25251 (1023E/1026R 210000-309999) p.70 — each: "Tighten front/rear wheel bolts alternately to 120 N•m (89 lb-ft).". Wheel Bolt — 1025R, Base Unit serial 110001– (pre-HJ100001) 120 N·m (89 lb-ft) (Same figure as the 1023E above, from the combined 1023E(310001-)/1025R(110001-) manual dated September 2013. Superseded at the HJ100001 serial break — see next row.) Source: John Deere OMLVU25849 (1023E 310001-/1025R 110001- Compact Utility Tractors, NA, Sept. 2013), "Removing and Installing Wheels": "Tighten wheel bolts to 120 N·m (89 lb-ft).". Wheel Bolt — 1023E / 1025R, Base Unit serial HJ100001–current / Cab serial KK400001–current 95 N·m (70 lb-ft) (SERIAL-NUMBER BREAK: this is a lower torque than the earlier serial ranges above, at the SAME nominal models — the break is by serial number, not by model year or a generation label. Confirmed unchanged through the newest RS000001-/MY2025 manual. This manual is explicitly titled for 1023E (HJ100001-) AND 1025R (HJ100001-)/1025R Cab (KK400001-) together, with one shared, undifferentiated Wheel Bolt Torque spec — the 1023E shares this figure, it is not 1025R-only. Find your tractor's serial number on its ID plate before torquing.) Source: John Deere OMTR110056 ("1023E and 1025R Compact Utility Tractors 1023E (HJ100001-), 1025R (HJ100001-), 1025R Cab (KK400001-)", NA), "Remove and Install Wheels": "Tighten wheel bolts alternately to specification. Item: Wheel Bolt Torque, Specification: 95 N·m (70 lb·ft)"; confirmed unchanged in OMTR153280 ("1023E and 1025R ... Serial No. RS000001-", NA). Wheel Bolt — 2025R / 2032R, older combined manual (serial 010001–Current, OMLVU28128) Front 180 N·m (133 lb-ft) / Rear 115 N·m (85 lb-ft) (DISCLOSED CONFLICT: this combined 2025R/2032R Operator's Manual prints a front/rear split that neither the current 2025R-only manuals nor the dedicated 2032R/2038R manual repeat (see the next two rows). John Deere does not explain the discrepancy in the manuals themselves — check your own tractor's serial number and manual edition, do not average or guess between these figures.) Source: John Deere OMLVU28128 (2025R and 2032R Compact Utility Tractors, NA, serial 010001-Current) p.13-4: "Tighten front wheel bolts alternately to 180 N·m (133 lb-ft)." / "Tighten rear wheel bolts alternately to 115 N·m (85 lb-ft).". Wheel Bolt — 2025R, current 2025R-only manuals (serial HH100001– and Nov. 2020–current) 95 N·m (70 lb-ft) (Single value for front AND rear. CONFLICTS with the older combined manual's 180/115 N·m above — see that row's note. Consistent across both the HH100001- and the later Nov.-2020 2025R-only manuals, so this is the CURRENT figure as of the newest edition reviewed.) Source: John Deere OMTR110061 (2025R HH100001-current) p.280-1: "Wheel Bolt —Torque. . . 95 N·m (70 lb·ft)"; confirmed identically worded in OMTR117482 (2025R Nov. 2020-current). Wheel/Lug Bolt — 2032R / 2038R, dedicated manual (all NA serial prefixes: GH100001-, KL100001-, NP000001-, T000001-) 140 N·m (103 lb-ft) (Single "Front and Rear Lug Bolt" spec, consistent across all four NA serial-prefix editions reviewed — no serial break found for the dedicated 2032R/2038R manual. For 2032R specifically this CONFLICTS with the older combined-with-2025R manual's front 180/rear 115 N·m above (see that row's note) — the GH100001- manual applies to GH-serial machines; check your own tractor's serial number and manual edition rather than assuming which figure applies.) Source: John Deere OMLVU31185 (2032R/2038R GH100001-) p.280-1, OMTR112402 (KL100001-) p.280-1, OMTR135273 (NP000001-) p.280-1, OMTR153652 (T000001-) p.280-1 — each: "Front and Rear Lug Bolt—Torque. . . 140 N·m (103 lb·ft)". Wheel Bolt — 3025E / 3032E / 3038E (earliest through RS000001-/MY2025-current) 140 N·m (103 lb-ft) (Front and rear identical, confirmed unchanged from the earliest combined 3025E/3032E/3038E manual through the earlier 3032E/3038E-only manual (010001-609999, which predates the 3025E's introduction) and the newest RS000001-/MY2025 edition — no serial break found across the full range.) Source: John Deere OMLVU31846 (3025E/3032E/3038E earliest) p.14-3: "Front Wheel Bolts / Tighten wheel bolts alternately to 140 N·m (103 lb-ft)." / "Rear Wheel Bolts / Tighten wheel bolts alternately to 140 N·m (103 lb-ft)."; confirmed in OMLVU20279 (3032E/3038E 010001-609999) p.58 and OMTR153655 (RS000001-/MY2025) p.280-1. Wheel Bolt — 3033R / 3039R / 3046R (earliest May-2014 through T000001-current) 140 N·m (103 lb-ft) (Front and rear identical, same figure as the 3025E/3032E/3038E line above. Confirmed unchanged from the earliest (010001-, May 2014) combined manual through the latest T000001-current edition.) Source: John Deere OMLVU29135 (3033R/3039R/3046R 010001-) p.14-3: "Tighten front/rear wheel bolts alternately to 140 N·m (103 lb-ft)."; confirmed in OMTR148219 (T000001-current) p.280-1. Always confirm against your machine’s service manual.

Model coverage

1023E (010001–current (serial break at HJ100001)), Compact Utility Tractor; 1026R (010001–309999 (no later source)), Compact Utility Tractor; 1025R (110001–current (serial-break spec change at HJ100001)), Compact Utility Tractor; 2025R (010001–current (see conflict note)), Compact Utility Tractor; 2032R / 2038R (GH100001–current, all NA serial prefixes), Compact Utility Tractor; 3025E / 3032E / 3038E (earliest–current), Compact Utility Tractor; 3033R / 3039R / 3046R (010001–current), Compact Utility Tractor.

Related lookups

Loading interactive lookup…