2020 Ford Escape Lug Nut Torque & Bolt Specs

The source-backed 2020 Ford Escape lug nut torque is 100 ft-lbs (135 Nm). Match the application and hardware conditions in the cited manual; do not assume the same value applies to aftermarket hardware.

Does this apply to my Escape?

Yes — the same 100 ft-lbs (135 Nm) for every 2020 Ford Escape version we checked: 3 of 3 trim/engine versions, against the 2020 ESCAPE Owner’s Manual, p. PDF p. 378.

Versions checked (3)
  • 1.5T EcoBoost: Gen4
  • 2.0T EcoBoost: Gen4
  • 2.5L 4-Cylinder: XLT

This figure assumes: OEM wheels and lug nuts as specified in the owner's manual.

Aftermarket wheels or lug nuts: use the wheel or lug-nut maker's figure.

Lug nut torque: 100 ft-lbs (135 Nm).

Where these numbers come from

3 values for the 2020 Ford Escape are checked against a maker’s document. Each row names the document, the page or section and the manual’s own wording, so you can check it yourself.

SpecValueDocument and pageManual wordingApplies to
Lug Nut — torque100 ft-lbs (135 Nm)2020 ESCAPE Owner’s Manual, p. PDF p. 378 · fordservicecontent.com“Wheel Lug Nut Torque Specifications … lb-ft (Nm) * M12 x 1.5 100 (135)”OEM wheels and lug nuts as specified in the owner's manual. Applies to: 1.5T EcoBoost: Gen4; 2.0T EcoBoost: Gen4 (2 configurations).
Rear Hub/Axle Nut (All) — torque4WD only: 98 ft-lbs (133 Nm) — use new original-equipment nut (SKF [52])SKF Torque specification guide 2023 - Front & rear axle nut, hub mount and lug nut torque specifications, p. PDF p. 15 · cdn.skfmediahub.skf.com“SKF 2023 torque guide p.15, FORD, MERCURY TRUCKS: Escape 4WD 2020-2021, front 74/100 [136], rear 98/133 [52]”Rear axle/half-shaft nut torque as printed by SKF for this make/model/year; Use new original-equipment nut (SKF note [52]); SKF prints a rear value for 4WD only. Applies to: 1.5T EcoBoost: Gen4; axle: rear (1 configuration).
Wheel Lug Nut — torque100 ft-lbs (135 Nm)2020 ESCAPE Owner’s Manual, p. PDF p. 378 · fordservicecontent.com“Wheel Lug Nut Torque Specifications … lb-ft (Nm) * M12 x 1.5 100 (135)”OEM wheels and lug nuts as specified in the owner's manual. Applies to: 2.5L 4-Cylinder: XLT (1 configuration).

Latest proof checked 2026-10-23. Values that changed after a check are listed in the corrections log.

Tools for this job

Matched to the specs on this page.

As an Amazon Associate I earn from qualifying purchases. Tool picks are general options, not a fit guarantee for your vehicle or fastener.

Every value on this page for the 2020 Ford Escape names the document it was checked against. Match the exact hardware and manual conditions before maintenance. A source for one field does not verify the other specifications.

Ford torque and wheel-hardware specs vary sharply by chassis, especially between passenger cars, half-ton trucks and Super Duty trucks. Match the exact application and resolve source conflicts before tightening; a legacy database row is not authoritative evidence.

Common fastener categories on the 2020 Ford Escape

Repair guidance for this model year

For 2020 late-model work: Modern vehicles increasingly mix aluminum, high-strength steel and coated fasteners. Use the exact fastener record and service-manual procedure for the joint you are touching; do not adjust torque or add compounds unless the procedure calls for it.

Tools you will need

Frequently asked questions

What is the lug nut torque on a 2020 Ford Escape?

The source-backed lug-nut torque for the 2020 Ford Escape is 100 ft-lbs (135 Nm). Match the exact application, hardware and tightening conditions in the cited manual. Field evidence: Lug nut torque confirmed against 2020 ESCAPE Owner’s Manual, p. PDF p. 378 (https://www.fordservicecontent.com/Ford_Content/Catalog/owner_information/2020-Ford-Escape-Gas-HEV-PHEV-Owners-Manual-version-3_om_EN_08_2020.pdf). OEM wheels and lug nuts as specified in the owner's manual; engine: 1.5T EcoBoost; trim: Gen4; axle: all.

Does the 2020 Ford Escape lug nut torque depend on trim or engine?

No. We found the same 100 ft-lbs (135 Nm) for every 2020 Ford Escape version we checked: 3 of 3 trim/engine versions, against the 2020 ESCAPE Owner’s Manual, p. PDF p. 378. This figure assumes: OEM wheels and lug nuts as specified in the owner's manual. Aftermarket wheels or lug nuts: use the wheel or lug-nut maker's figure.

Are the 2020 Ford Escape fasteners metric or SAE?

Metric and SAE hardware can both appear on one vehicle, depending on the component and exact application. Use the individually verified field and the actual fastener or service manual rather than inferring a standard from the model year, make or generation. Bolt-head markings can help identify the hardware at the bench.

Not yet verified for the 2020 Ford Escape: lug nut socket size. Check your owner’s or service manual, or ask a dealer. Send a correction

Other Ford Escape years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2020 Ford Escape suspension & steering torque specs (control arm, ball joint, tie rod)

→ 2020 Ford Escape axle nut torque spec (CV axle & hub nut)

→ 2020 Ford Escape brake job torque specs (caliper, bracket & slide pins)

→ Full 2020 Ford Escape maintenance schedule (intervals, costs & free tracker) on ServiceSageAuto

Fasteners on record for the 2020 Ford Escape

3 of the 57 fasteners on record for the 2020 Ford Escape have at least one value checked against a maker’s document; each sentence below names it. A checked torque does not confirm the socket size, thread or part number. Where sources disagree, the value is withheld.

Wheels — 2020 Ford Escape

Wheel fasteners checked against a maker’s document for the 2020 Ford Escape. Wheel Lug Nut (Wheels). Torque: 100 ft-lbs (135 Nm). Source: 2020 ESCAPE Owner’s Manual, p. PDF p. 378. OEM wheels and lug nuts as specified in the owner's manual engine: 2.5L 4-Cylinder; trim: XLT; axle: all

Suspension — 2020 Ford Escape

Suspension fasteners checked against a maker’s document for the 2020 Ford Escape. Rear Hub/Axle Nut (All) (Rear axle nut at rear hub). Torque: 4WD only: 98 ft-lbs (133 Nm) — use new original-equipment nut (SKF [52]). Source: SKF Torque specification guide 2023 - Front & rear axle nut, hub mount and lug nut torque specifications, p. PDF p. 15. Rear axle/half-shaft nut torque as printed by SKF for this make/model/year; Use new original-equipment nut (SKF note [52]); SKF prints a rear value for 4WD only engine: 1.5T EcoBoost; trim: Gen4; axle: rear

Wheels & Tires — 2020 Ford Escape

Wheels & Tires fasteners checked against a maker’s document for the 2020 Ford Escape. Lug Nut (All corners). Torque: 100 ft-lbs (135 Nm). Source: 2020 ESCAPE Owner’s Manual, p. PDF p. 378. OEM wheels and lug nuts as specified in the owner's manual engine: 1.5T EcoBoost; trim: Gen4; axle: all

Also on record but not yet checked against a maker’s document (54): Brake Caliper Bolt, Camshaft Sprocket Bolt (1.5L EcoBoost I3), Camshaft Sprocket Bolt (2.0L EcoBoost I4), Camshaft Sprocket Bolt (2.5L Duratec Hybrid/PHEV), Connecting Rod Bearing Bolts (1.5L EcoBoost I3), Connecting Rod Bearing Bolts (2.0L EcoBoost I4), Connecting Rod Bearing Bolts (2.5L Duratec Hybrid/PHEV), Control Arm Bolt, Crankshaft Pulley Bolt (1.5L EcoBoost I3), Crankshaft Pulley Bolt (2.0L EcoBoost I4), Crankshaft Pulley Bolt (2.5L Duratec Hybrid/PHEV), Cylinder Head Bolts (1.5L EcoBoost I3), Cylinder Head Bolts (2.0L EcoBoost I4), Cylinder Head Bolts (2.5L Duratec Hybrid/PHEV), Exhaust Manifold Nuts (1.5L EcoBoost I3), Exhaust Manifold Nuts (2.5L Duratec Hybrid/PHEV), Exhaust Manifold Nuts (Turbocharger) (2.0L EcoBoost I4), Front Caliper Bracket Bolts (All), Front Caliper Slide Pin Bolts (All), Front Hub/Bearing Nut (Axle Nut) (All), Front Lower Control Arm Bolts (All), Front Strut Top Nut (Upper Mounting Bolts) (All), Front Strut-to-Knuckle Bolts (All), Intake Manifold Bolts (1.5L EcoBoost I3), Intake Manifold Bolts (2.0L EcoBoost I4), Intake Manifold Bolts (2.5L Duratec Hybrid/PHEV), Main Bearing Beam Bolts (2.0L EcoBoost I4), Main Bearing Cap Bolts (1.5L EcoBoost I3), Main Bearing Cap Bolts (2.5L Duratec Hybrid/PHEV), Oil Drain Plug, Oil Drain Plug (1.5L EcoBoost I3), Oil Drain Plug (2.0L EcoBoost I4), Oil Drain Plug (2.5L Duratec Hybrid/PHEV), Oil Pan Bolts (1.5L EcoBoost I3), Oil Pan Bolts (2.0L EcoBoost I4), Oil Pan Bolts (2.5L Duratec Hybrid/PHEV), Rear Caliper Bolt (EPB / electric parking brake) (All), Rear Caliper Bracket Bolts (All), Rear Caliper Slide Pin Bolts (All), Rear Control Arm Bolts (All), Rear Shock Lower Bolt (All), Rear Shock Upper Nut (All), Rotor Retaining Screw (All), Spark Plugs (1.5L EcoBoost I3), Spark Plugs (2.0L EcoBoost I4), Spark Plugs (2.5L Duratec Hybrid/PHEV), Sway Bar End Link Nut (All), Tie Rod End Nut (All), Timing Chain Tensioner Bolt (1.5L EcoBoost I3), Timing Chain Tensioner Bolt (2.0L EcoBoost I4), Timing Chain Tensioner Bolt (2.5L Duratec Hybrid/PHEV), Valve Cover Bolts (1.5L EcoBoost I3), Valve Cover Bolts (2.0L EcoBoost I4), Valve Cover Bolts (2.5L Duratec Hybrid/PHEV). Their stored figures are not shown until a document confirms them. Have the factory figure? Send a correction.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then compare any source-backed fields on this page with the actual hardware and service manual.

Loading the interactive 2020 Ford Escape fastener lookup with per-bolt filtering, part links, and torque tools…