2022 Ford Edge Lug Nut Torque & Bolt Specs

The 2022 Ford Edge lug nut torque is 150 ft-lbs (203 Nm), tightened with a 19mm hex socket on M14x1.5 studs. Torque in a star pattern in two passes (snug, then final), and re-check after the first 50–100 miles of driving. Use a calibrated torque wrench — not an impact gun — for the final pass. The wheel bolt pattern is 5x108.

Lug nut torque: 150 ft-lbs (203 Nm) · Socket size: 19mm hex · Thread: M14x1.5 · Bolt pattern: 5x108.

This page is the OEM-referenced fastener summary for the 2022 Ford Edge. Use it before any maintenance or repair job where torque values matter — brake work, wheel changes, suspension service, engine teardowns, or oil changes. Specs are pulled from manufacturer service literature, cross-checked against community data, and updated as new chassis variants become available.

Ford lug-nut torque varies more by chassis than most makes — 100 ft-lbs for Focus/Fusion/Fiesta, 150 ft-lbs for half-ton F-150, and 165 ft-lbs for Super Duty F-250/F-350. F-150s from 2004-2014 use a 21mm OEM socket, while 2015+ aluminum-body trucks moved to the larger 22mm. Ford torque-to-yield (TTY) head bolts are standard from the early 2000s — do not reuse them, ever.

Common fastener categories on the 2022 Ford Edge

Wheel / lug nut torque and thread spec (covered above)
Brake caliper bracket bolts (typically 80-130 ft-lbs) and slide/guide pins (18-35 ft-lbs)
Engine oil drain plug torque — rarely above 30 ft-lbs; always use a new crush washer
Transmission pan, valve cover, and intake manifold bolts (low torque, often 89-106 in-lbs)
Suspension control arm, sway bar, tie rod end and ball joint torque
Spark plug torque (typically 10-15 ft-lbs on aluminum heads — do not exceed)
Differential cover bolts (RWD/4WD only) and transfer case fasteners

Repair guidance for this model year

For 2022 late-model work: Modern vehicles increasingly use aluminum body and suspension components. Aluminum fastener torque is typically 60-70% of equivalent steel torque, and aluminum threads strip easily. Use a calibrated torque wrench and apply anti-seize on any steel fastener threading into aluminum.

Tools you will need

Metric socket set (8mm-22mm), 6-point impact-rated
Calibrated torque wrench (10-150 ft-lbs covers most automotive jobs; add a 0-250 ft-lbs wrench for truck lug nuts)
Breaker bar (24" minimum) for initial loosening
Penetrating oil (PB Blaster or Kroil) for any fastener over 5 years old
Anti-seize on stainless or dissimilar-metal threads; thread-locker (Loctite blue) on critical reassembly

Frequently asked questions

What is the lug nut torque on a 2022 Ford Edge?

The OEM-specified lug-nut torque for the 2022 Ford Edge is 150 ft-lbs (203 Nm), using a 19mm hex socket on M14x1.5 thread studs. Use a calibrated torque wrench in a star pattern, in two passes (50% and 100%), and re-check after 50-100 miles of driving.

What socket size do I need for the 2022 Ford Edge lug nuts?

The 2022 Ford Edge uses a 19mm hex socket. A 6-point impact-rated socket is recommended over a 12-point chrome socket — 12-points round off lug nuts under impact-driver use.

Are the 2022 Ford Edge fasteners metric or SAE?

Metric is the standard for this vehicle. Most fasteners on this vehicle are metric (M6, M8, M10, M12, M14). Bring a full metric set; SAE substitutes can round the head. Bolt-head markings are the fastest way to confirm grade and material at the bench.

Other Ford Edge years

Same model, different model year — fastener spec may change. Always confirm against the year for your VIN.

→ 2022 Ford Edge oil drain plug torque & size

→ 2022 Ford Edge suspension & steering torque specs (control arm, ball joint, tie rod)

All 19 2022 Ford Edge fastener specs

Per-bolt torque, wrench size, and thread spec for the 2022 Ford Edge, sourced from OEM service literature and verified against community shop data. Values pair imperial (ft-lb) and metric (Nm) where the manufacturer publishes both. 4 of the 19 fastener specs on this page are independently verified against OEM service manuals and manufacturer torque data (last reviewed June 2026).

Brakes — 2022 Ford Edge

Brake fasteners on the 2022 Ford Edge — caliper bracket, slide pins, and banjo bolt torque follow. Front caliper bracket bolt tightens to 122 ft-lbs (165 Nm), takes a 18mm hex driver, runs on M14 threads, located at the front knuckle. This figure is independently verified against OEM service data. The front caliper slide pin uses a 13mm hex drive on a M10 thread, torqued to 44 ft-lbs (60 Nm) at the front caliper. OEM-verified spec.

Engine — 2022 Ford Edge

Engine bolt-by-bolt torque for the 2022 Ford Edge, including the long block, valve covers, and intake. The oil drain plug uses a 15mm hex drive on a M12x1.75 thread, torqued to 20 ft-lb at the engine oil pan. At the cylinder head, the spark plug torques to 13 ft-lb (9/16" (14mm) drive, M14x1.25 thread).

Drivetrain — 2022 Ford Edge

Drivetrain and driveline fasteners for the 2022 Ford Edge — axle, transmission, and differential plugs. At the front hub, the front axle hub nut torques to 258 ft-lb (32mm hex drive, M24 thread).

Electrical — 2022 Ford Edge

Electrical fasteners on the 2022 Ford Edge. For the engine block, plan for a 13mm tool on a M8 x 1.25 stud; final torque is 35 ft-lbs (48 Nm) (alternator bolts).

Wheel Hardware — 2022 Ford Edge

Wheel Hardware fasteners on the 2022 Ford Edge. Lug nut tightens to 150 ft-lbs (203 Nm), takes a 19mm hex driver, runs on M14x1.5 threads, located at the all wheels.

Suspension - Shocks — 2022 Ford Edge

Suspension - Shocks fasteners on the 2022 Ford Edge. The rear shock lower bolt uses a 18mm drive on a M12 x 1.75 thread, torqued to 85 ft-lbs (115 Nm) at the control arm. At the body mount, the rear shock upper bolts torques to 52 ft-lbs (70 Nm) (15mm drive, M10 x 1.5 thread).

Brakes - Front Calipers — 2022 Ford Edge

Brakes - Front Calipers fasteners on the 2022 Ford Edge. At the caliper bracket, the front caliper guide pin bolts torques to 44 ft-lbs (60 Nm) (13mm drive, M8 x 1.0 thread). This figure is independently verified against OEM service data. For the knuckle, plan for a 18mm tool on a M14 x 2.0 stud; final torque is 122 ft-lbs (165 Nm) (front caliper bracket bolts). OEM-verified spec.

Suspension - Struts — 2022 Ford Edge

Suspension - Struts fasteners on the 2022 Ford Edge. For the knuckle, plan for a 21mm / 24mm tool on a M16 x 2.0 stud; final torque is 184 ft-lbs (250 Nm) (strut to knuckle bolts). Strut mount nuts (upper) tightens to 26 ft-lbs (35 Nm), takes a 13mm driver, runs on M8 x 1.25 threads, located at the strut tower.

Engine - Valve Train — 2022 Ford Edge

Engine - Valve Train fasteners on the 2022 Ford Edge. Valve cover bolts tightens to 89 in-lbs (10 Nm), takes a 8mm / 10mm driver, runs on M6 x 1.0 threads, located at the cylinder head.

Engine - Cooling — 2022 Ford Edge

Engine - Cooling fasteners on the 2022 Ford Edge. The water pump bolts uses a 8mm drive on a M6 x 1.0 thread, torqued to 89 in-lbs (10 Nm) at the block.

Wheels & Tires — 2022 Ford Edge

Wheels & Tires fasteners on the 2022 Ford Edge. At the wheels, the wheel lug nuts torques to 150 ft-lbs (203 Nm) (19mm drive, M14 x 1.5 thread).

Engine - Intake — 2022 Ford Edge

Engine - Intake fasteners on the 2022 Ford Edge. For the cylinder head, plan for a 8mm tool on a M6 x 1.0 stud; final torque is 89 in-lbs (10 Nm) (intake manifold bolts).

Engine - Ignition — 2022 Ford Edge

Engine - Ignition fasteners on the 2022 Ford Edge. Spark plugs tightens to 11 ft-lbs (15 Nm), takes a 5/8" (16mm) driver, runs on M14 x 1.25 threads, located at the cylinder head.

Drivetrain - Transmission — 2022 Ford Edge

Drivetrain - Transmission fasteners on the 2022 Ford Edge. The transmission pan bolts uses a 8mm drive on a M6 x 1.0 thread, torqued to 106 in-lbs (12 Nm) at the transmission case.

New to torquing wheels? Read our How lug nut torque works — the complete guide for star-pattern sequence, re-torque intervals, and how to read a lug spec — then use the 2022 Ford Edge numbers above.

Loading the interactive 2022 Ford Edge fastener lookup with per-bolt filtering, part links, and torque tools…